millerkiller77
Well-known member
Any of you familiar with Ross muzzle brakes? I have a local gunsmith working on a Tikka and he's recommending the Ross brakes. Any feedback would be appreciated.
Ross muzzle brakes
- Thread starter millerkiller77
- Start date
Addicting
Well-known member
No reviews just make sure he doesn’t locktite it on there and makes a cap. That what when you change your mind you don’t have to go back.
buffybr
Well-known member
I've never heard of a Ross brake, but I do have KDF brakes on my .375 RUM and .300 Weatherby. I've taken each of those rifles on at least 3 international hunts and have shot hundreds of rounds through each of them. The .375 RUM had maybe 10 shots through it before I had the brake installed, and I've never shot a round through my .300 Wby without it's brake.
As far as I'm concerned those brakes could be locktited or welded on, and I don't have any caps.
Fire_9
Well-known member
I don’t think they can be beat for the price. Pretty typical side port muzzle brake. I’d go for it
millerkiller77
Well-known member
My thoughts also, the porting looks the same as an APA. I ordered one up and will post side by side pics and a range report.
Addicting
Well-known member
Big difference from the dude who braked his 223 only to get his butt kicked on his first range day. OP never said a caliber so when in doubt whip the caution statement out.
millerkiller77
Well-known member
I must have missed something..lol . Who put a brake on a .223?
This particular one is going on a 300wsm
Addicting
Well-known member
Every AR15 owner, especially if the bench next to me at the range is open.
millerkiller77
Well-known member
I must be a weirdo , all mine have flash hiders or linear compensators
Addicting
Well-known member
They are the same thing…
p_ham
Well-known member
I don't understand how he's doing them so inexpensively. I haven't seen any up close. I know they've got raving reviews though.
millerkiller77
Well-known member
One arrived today. You definitely get what you pay for, I'm not a machinist but this isn't my first rodeo either. The center bore looks like it was cut with a tap, or fed too fast with a dull cutter and it's not concentric.
Crappy cell phone pics, but still....... I'd really like to hear back from some of you with more experience than me. I can't put this on my barrel.
Crappy cell phone pics, but still....... I'd really like to hear back from some of you with more experience than me. I can't put this on my barrel.
cahunter805
Well-known member
- Joined
- May 27, 2014
- Messages
- 2,464
I prefer the brakes by Nathan at Muzzlebrakes and more. His beast brakes are impressive.
p_ham
Well-known member
Check out Salmon River Solutions.
There's always APA.
There's always APA.
