Henry mag tube conversion

[p_ham]

Smaller project but it turned out cool.
My biggest hangup with the Henry centerfire levers is the ugly mag tube with the loading opening in it.
This rifle came in for a barrel chop and thread for suppressor use. We decided to go ahead and convert it to a traditional style tube mag instead of cutting down the Henry setup.
I cut the barrel dovetail at 3/8 60⁰ but this could be done on a factory dovetail too.
Since most Marlin parts are hen's teeth right now, I ended up making the tube, cap, and stud. I used a WWG follower and modified it as needed.

 

[Scott85]

I think this could fill a niche.

 

[p_ham]

I think this could fill a niche.

I do too. I've spoken to a larger company about handling production already.

 

[std7mag]

Nice work as always, Paul!!

Wait.....

A supressor on a lever gun???

That person will be in the same spot as me in the afterlife for putting a purple Boyds AT-One stock on a Mauser.

 

[p_ham]

Nice work as always, Paul!!

Wait.....

A supressor on a lever gun???

That person will be in the same spot as me in the afterlife for putting a purple Boyds AT-One stock on a Mauser.

I'm ok with it. I did have a fella contact me about cutting his early 1900's Marlin 1894 down into a Mare's Leg. I tried to buy it off of him to save it.

 

[BackofBeyond]

Nice work as always, Paul!!

Wait.....

A supressor on a lever gun???

That person will be in the same spot as me in the afterlife for putting a purple Boyds AT-One stock on a Mauser.

I’m oddly more ok with a suppressor on a lever gun than I am with a scope on a lever gun.

 

[std7mag]

I’m oddly more ok with a suppressor on a lever gun than I am with a scope on a lever gun.

Both are heresy!!

Like a 1911 not in 45ACP.

 

[CRJR45]

I love it !

 

[Richard_Mann]

Smaller project but it turned out cool.
My biggest hangup with the Henry centerfire levers is the ugly mag tube with the loading opening in it.
This rifle came in for a barrel chop and thread for suppressor use. We decided to go ahead and convert it to a traditional style tube mag instead of cutting down the Henry setup.
I cut the barrel dovetail at 3/8 60⁰ but this could be done on a factory dovetail too.
Since most Marlin parts are hen's teeth right now, I ended up making the tube, cap, and stud. I used a WWG follower and modified it as needed.

View attachment 267936View attachment 267937View attachment 267938View attachment 267939View attachment 267940View attachment 267941View attachment 267942View attachment 267943View attachment 267944View attachment 267945View attachment 267946View attachment 267947View attachment 267948

Any chance I could get some insight on making these parts or, since you said you’ve talked to someone about handling the production of these parts, could I purchase the kit? This is exactly what I’ve wanted to do to mine for years. Thanks.

 

[p_ham]

Any chance I could get some insight on making these parts or, since you said you’ve talked to someone about handling the production of these parts, could I purchase the kit? This is exactly what I’ve wanted to do to mine for years. Thanks.

I don't have all the measurements worked out for the kits yet. If you want to send your rifle I can do the conversion for you.

 

[Richard_Mann]

I don't have all the measurements worked out for the kits yet. If you want to send your rifle I can do the conversion for you.

Can you DM me the info? I regret to admit I can’t figure out how to message on here. Lol

 

[p_ham]

Can you DM me the info? I regret to admit I can’t figure out how to message on here. Lol

There's a minimum post count before you can use DM. It's either 10 or 15?

 

[Richard_Mann]

There's a minimum post count before you can use DM. It's either 10 or 15?

Well that would be the reason. I saw your post on here and made an account simply to reply to you lol are you comfortable sharing the cost of what you did hear? Im interested in the barrel chop and the conversion. Or if you feel comfortable, email or text?

 

[p_ham]

Well that would be the reason. I saw your post on here and made an account simply to reply to you lol are you comfortable sharing the cost of what you did hear? Im interested in the barrel chop and the conversion. Or if you feel comfortable, email or text?

Lol-thanks. I haven't seen anybody else doing the conversions.

Countrycustommetals.com I've got a "contact me" page on there.

 

[Richard_Mann]

Lol-thanks. I haven't seen anybody else doing the conversions.

Countrycustommetals.com I've got a "contact me" page on there.

Awesome I sent you guys a message on there.

 

[Deleted member 28227]

That person will be in the same spot as me in the afterlife for putting a purple Boyds AT-One stock on a Mauser.

Always great to meet another subscriber of truck stop knife of the month club.

 

[noharleyyet]

Always great to meet another subscriber of truck stop knife of the month club.

 

[Fishmaster196]

Paul does great work. He said that a prospective customer asked him to do an older Marlin to a Mares leg which is almost heresy! He offered to buy it. They only made so many of them.
Henry Rifles are good and they have a definite spot in the lever action world but they definitely aren’t a Winchester or a Marlin lever action.
Accessorize the $#!t out of them!