std7mag's latest activity
-
SI think a few coats of oil finish will really make it look sharp. Me being me, I'd probably already have a coat on there to protect it...
-
SLooks like suede with the copper. Very Cool, spacers and all.
-
SLooks good even with the spacers. They’re still coming off though. Side note: I’m gonna use the K3 this season. After talking with my...
-
SNoted, thanks!
-
SI would NOT recommend a bandsaw. A slow cut with table saw or compound miter saw will be much cleaner. Even so, I would put blue tap...
-
SDon’t know the science behind it, but I put on another coat of the iron acetate and it turned the black stock a grey color. So, I...
-
SI know a guy....
-
SI heard at one point that you could order them from the custom shop as components back in the early 10s. I had thought it had...
-
SDay 2 of the iron acetate brew. The pine popsicle stick is turning pretty dark. I decided it couldn’t hurt to start putting it on the...
-
SI’m going to finish it with tru oil, most likely. A good thing about this solution opposed to something surface level is that it gets...
-
SNope, no heat involved. Just apply and let it soak. Here it is after about 10 minutes. This is happening in real time
-
SThanks for the info on the K3-60B. I learned something. Did you apply heat to get the ebonizing? You could probably get the same or...
-
SIt’s a K3 60-B, which is weaver’s first nitrogen filled scope. Or whatever gas they used. I’m all finished with inletting the barrel...
-
SI am not sure they even had Nitrogen in them. But I really don't know. I see what you are doing though. It will work, be different...
-
SNone planned, but I’d be open to it. I do not have the skill for it and it’s not in my price range at the moment The finish on the...
