Hunt Talk Radio - Look for it on your favorite Podcast platform

What's your 2018 Load Recipe?

I’m still trying to work up a new 30-06 load, and it’s kicking my butt. Trying to go with the 178 eld-x, and have tried 2 powders (imr 4451 and Superformance) but can’t seem to find a decent load. I’m shooting Remington 700s (loading for 3 different rifles). I know these aren’t going to be tack drivers, but I’m confident they can get down near 1” groups if I can find the right loads. Back to the bench...
My friend in the UK has just got some ELD-X loaded up for him, 212 in his 300, which group at .3'' @100 yards.
The 178's .45''@100 yards in his .308.

The powder is RS50, can't say I have heard of that powder or even if it is available in the US

I hope that helps with the 30-06

Cheers

Richard
 
30-06
Brass Winchester
Primer WLR
Bullet 180 gr. Nosler Partition
Powder 62 gr. RL22
Velocity 2810 fps 22" barrel
Elk or deer but that's what the 25-06 is for.

Greg
 
Worked this load up for my semi-custom last year and have been shooting it out to 710 yards so far this year.

Caliber: 300 WSM
Brass: Norma
Primer: CCI BR2
Powder: 61.6 grains of Alliant RL-17
Projectile: 180 grain Nosler Accubond
OAL: 2.88"
 
Cartridge: 280 Ackley Improved
Brass: Fireformed Nosler brass
Primer: Winchester LR
Powder: IMR4350 55.2grains
Bullet: 145 Barnes LRX
Purpose: Desert Mule deer and New Mexico Elk.

Cartridge: 223 REM
Brass: Hornady
Primer: CCI
Powder: Reloader 10 24.0grains
Bullet: Nosler Ballistic Tip Lead Free
Purpose: varmints
 
7mm-HT
140 gr. Nosler Accubonds
46.0 gr. IMR 4350
Fed. cases/CCI LR Primers
OAL: 2.830
 
7mm Rem Mag
168 gr. Berger VLD
Winchester cases/ CCI primers

I put a new stock on this rifle recently and plan on bedding the action, then getting to work on a load work up. Plan on using this for my Idaho elk hunt.

.308 Win
Sierra Gameking 165 gr. HPBT
44.5 gr. Varget
CCI primers

Texas whitetail/Axis/pig shoot.
 
Change of plans...
7mm-HTAI barrel is shot out.
I screwed on an E.R. Shaw 24" barrel in 250 Savage.

Loads a work in progress.
Hornady cases.

90 gr. Sierra BlitzKing ( coyote load)

100 gr. Nosler Ballistic Tip( deer load).
 
7mm Mashburn
Nosler Brass
CCI250
74gr H-1000
Barnes 168gr LRX

7x57
Norma Brass
CCI200
50g H414
Nosler 140 e-tip

Will have to try H414 in the old 7x57. I've had really good results with varget and 150 partitions. I like your "four of a kind sig" I'm a huge 7mm fan. Looks like a good group of serious handloaders here.
 
Current work in progress:

7mm-HT
140 gr AccuBond
48.5 gr RL-19
Fed 210M primer
2710 fps
2.232 CBTO
 
Back
Top