150grn ELD-X in a 7mm-08

Moose_04 · Aug 20, 2018

Hey Brian,

I do not have experience loading for the 7mm/08, but I have loaded the Hornady ELD-X in 143 GR for my 6.5 Creedmoor (or man bun to others) with IMR 4350 with terrific results. I also loaded the 168 GR Hornady ELD-M for my 300 WM with great success.

On another note, I have been loading the 150 GR Nosler ABLR in my 7mm Rem Mag with great accuracy and IMR 4831 powder.

I hope this helps.
Moose

Clambdin · Aug 21, 2018

Moose, have you killed any game with the 150 ABLR?

Moose_04 · Aug 21, 2018

Clamdin,

I have taken two mule deer bucks with those bullets. They followed the normal lung shot death method of boom, flop, and dead. Unfortunately, I cannot report how they perform at longer range as those deer were taken at ~75 yards and 200 yards.

MThuntr · Aug 21, 2018

I'm going to be giving RL16 a try with 7mm-08.

CATAHOULA12 · Aug 25, 2018

In my 7mm-08 I use Varget. But, I fire the 162 ELD-X out of it..

claybreaker · Sep 9, 2018

Mthuntr said:
I'm going to be giving RL16 a try with 7mm-08.

Let's us know how that goes.... bullet weight?

Be Safe,

Beanland_fan · Sep 16, 2018

Try the 150 ELDX over 45 to 46 grains R26 with a magnum primer like a 215M or WLRM, or Tula LRM if you have them. From reading it looks like several guys over on 24hourcampfire are having success with that combo.

RookieHunter · Oct 13, 2018

HiMtnHntr said:
I have tried RL 17 and the 150 gn eldx in my 7mm-08. Velocity was great, near 2,900 fps. Accuracy was just so-so.

This was my finding as well...but with a little work I did find accuracy by backing down on the velocity and out seating the bullet as far as my mag would allow. Went from 2920fps with a 2.8"AOL 5 shot groups just over and around 1 1/2" (Groups where circular); to 2820fps with a 2.89 AOL 5 shot group of 3/4" to 7/8"...three of the shots in the 1/2" to 3/8" in several of the groups.

How do the ELDX 150 perform in the field? 230yds quartering shot into an antelope doe resulted in a small hole in the upper chest and an exit wound the size of a fist out just behind the shoulder. Bullet did fragment...two small pieces found in the shoulder. Goat tipped over and kicked a few times. I'm happy with this bullets performance thus far. For elk hunting I will avoid frontal shots but wouldn't hesitate on a shot behind the shoulder out to 350yds.

James

Wildhunter · Jan 16, 2021

Hey guys, looking for your opinions. New to reloading and trying to develop a load for my 7mm-08. I have access to IMR 4451, 4895, 4831, or accurate 2460. What do you think would be the best choice for a 150gr ELD-X? Any thoughts would be awesome.

winmag · Jan 16, 2021

Wildhunter said:
Hey guys, looking for your opinions. New to reloading and trying to develop a load for my 7mm-08. I have access to IMR 4451, 4895, 4831, or accurate 2460. What do you think would be the best choice for a 150gr ELD-X? Any thoughts would be awesome.

Out of those powders I’d try IMR4451. Check out Hodgdon’s website for load data.

Wildhunter · Jan 17, 2021

winmag said:
Out of those powders I’d try IMR4451. Check out Hodgdon’s website for load data.View attachment 170225

Right on! I’m headed there now. Thanks.

Colorado hunter Tim · Jan 17, 2021

I have a Tika 7mm 08 and shoot 150 grain ELD-x's. It is extremely accurate. I am new to reloading and I bought this rifle from a buddy that did all of the work for me. I use the the H380

GunTruck · Jan 24, 2021

I have been loading 145gr, 150gr, and 160gr bullets in my Tikka lately. First off I use the shortest bullets
I can get Like Nosler Partitions. Any way RL26 gave 2772 FPS, You can use MRP also but the loads are very compressed.
With 145gr Speer I got 2880 FPS with the RL26 and the RL17. I,m working on loads using PP4000MR so far not much accuracy.
but did get 2895 FPS shooting 145gr Speer using win cases and WLRM primers. Have more loaded but staying indoors right
now. Using Sierra 150gr I got 2816 FPS using RL26. I,m also loading 154gr Interbonds but bullet is to long. I should have bought the flat bases ones. Any way I have some loaded with RL17, we will see what happens. PP4000MR would be great if I could get some accuracy out of it. Hunter shows promise with 145gr and maybe 150gr, but I,m almost out of that powder.

DamascusSteel · Jan 24, 2021

If you don't mind ball powder win 760 would help drive your velocity up and is readily available from my experience.

GunTruck · Jan 27, 2021

I have used W760 a lot for 140gr bullts and 130gr and 120grbullets but not for heavier. I,ll give it a try.

Thanks, I,m also working on Superformance loads.

150grn ELD-X in a 7mm-08

Moose_04

New member

Clambdin

Member

Moose_04

New member

MThuntr

Well-known member

CATAHOULA12

Member

claybreaker

Member

Beanland_fan

Active member

RookieHunter

Member

Wildhunter

New member

winmag

Well-known member

Wildhunter

New member

Colorado hunter Tim

Member

GunTruck

Member

DamascusSteel

Active member

GunTruck

Member

Similar threads

Latest posts

Forum statistics

Share this page