tarheel
Well-known member
I stole this off a statewide gun forum and thought some of you who do a lot of reloading and were mechanically proficient enough could benefit from it. It looks to be fairly easy to fabricate and leaves room for a little bit of individual creativity. The last two links are for a source of the two most crucial parts.
https://www.youtube.com/watch?v=msgcZyYeTqM
The motor is 12vdc and could simply be powered by a spare car or mower battery for quite a long time before requiring a recharge. Drum rotation takes about eight seconds or so but a wirewound variable resistor could be placed in series with the motor to make it variable speed to achieve the best exposure time or adjust the flame.
http://usd.dx.com/product/13mm-12v-8rpm-high-torque-dc-geared-motor-901111323
http://www.rakuten.com/pr/product.aspx?sku=204610824
https://www.youtube.com/watch?v=msgcZyYeTqM
The motor is 12vdc and could simply be powered by a spare car or mower battery for quite a long time before requiring a recharge. Drum rotation takes about eight seconds or so but a wirewound variable resistor could be placed in series with the motor to make it variable speed to achieve the best exposure time or adjust the flame.
http://usd.dx.com/product/13mm-12v-8rpm-high-torque-dc-geared-motor-901111323
http://www.rakuten.com/pr/product.aspx?sku=204610824
Last edited:
