View Full Version : A taxidermy wreck
Big Fin
07-06-2009, 10:11 PM
Come home from work today, thinking I will sit in the recliner and read a book. Walk in to the Randy room, and things ain't looking too good. Not sure what happened, until a little closer inspection.
Before the wreck.
17907
Something is missing.
17908
What I would call a sheet rock failure.
17909
What happens when the elk slides down the wall and does a wedgie.
17910
What is left of the pedestal mount on the coffee table.
17913
"Cut me Mitch!"
17911
A splitting headache.
17912
The pieces are still in place, but needing some "body work." Hope the taxi has soltution for this one. Wonder if Home Depot and that "guaranteed to hold 150 pounds" hanger will cover these costs? I know that answer.
17914
Hmmm. Glad is was my son's elk, and not mine. :p
csutton7
07-06-2009, 11:48 PM
ouch and I guess we don't have to say never trust a mount attached just to sheetrock no matter what the hanger is rated for and always make sure you get that nail or screw set far enough into a stud---really sucks though is the bottom line....
schmalts
07-07-2009, 05:23 AM
hit a stud or nothing Randy...
Ridge Runner
07-07-2009, 06:32 AM
Oh wow sorry to see that. Got to go stud that's for sure..
mtmiller
07-07-2009, 07:42 AM
That blows. Good thing I only shoot little critters and can get away with sheet rock.
DRAFTSTUD
07-07-2009, 08:27 AM
I used the same damn bracket! Luckily, like you I used it on my son's Deer! Ripped out of the wall, took out the Molding with the point of the Mount board and made the Antlers a little loose. Sorry bout that! John
noharleyyet
07-07-2009, 09:02 AM
I used the same damn bracket! Luckily, like you I used it on my son's Deer! Ripped out of the wall, took out the Molding with the point of the Mount board and made the Antlers a little loose. Sorry bout that! John
...your garage is sheerocked?:D...must be a Loozianner first.
Layin_It_Down
07-07-2009, 09:03 AM
At least it didn't fall on someone's head..... If that's where you want to keep it mounted, now might be a good time to cut out the sheetrock and put in a brace between studs before you repair the wall.
TheTone
07-07-2009, 09:17 AM
Ouch, hope the taxidermist can get you pieced back together. Does your son know his elk took a tumble?
log dawg
07-07-2009, 09:36 AM
I know you are waiting for my reply .I did not pack that head and cape out so some poor handyman could ruin it , mayby next time you should get some help .Well I'm sure Mathew will forgive you .Ha!
Dinkshooter
07-07-2009, 11:02 AM
That is a hard lesson learned. Elk=At least a 3 inch lag.
On your next house, do like the big dogs and sheet the whole trophy room with 3/4 plywood before it is drywalled.
elk_hunter
07-07-2009, 12:28 PM
Man, sorry about that Randy...that really sucks!
shoots-straight
07-07-2009, 01:14 PM
That smooth wall sheetrock not an easy fix either. It'll take a good taper to fix that. I've built a few trophy rooms for clients. One house had 2 wolves chasing a stone sheep up a cliff. I practically filled the whole trophy room with backing. Sonic booms can bring down a mount. Not in my houses though. Sorry to hear of your misfortune.
Lawnboy
07-07-2009, 08:18 PM
If I'd have known that you had that thing only anchored into the sheetrock, I'd of never sat underneath it. Come on Randy you can't trust sheetrock to hold up a beast like that. Good thing you know a sheetrocker/lawnguy/dork:D I bet Matthew was pissed. I've got a studfinder you can borrow when you hang that thing back up.
duck hunter dave
07-07-2009, 08:28 PM
must have been that new sheetrock from China sorry man
Spitz
07-07-2009, 09:19 PM
Sorry to see that Randy. Maybe it's a sign though, that elk knew he was going to be replaced this fall and he wanted to go out with a bang! :)
Bugle Back
07-07-2009, 10:42 PM
I always fear this will happen everytime I hang a head. Sorry it happened to you.
That's too bad. I don't even trust my antelope in sheetrock.
My wife is vaguely amused by my 30 minutes on the ladder with a studfinder, tape measure and pencil every time I have something to hang. I used a 3 1/2" lag bolt in a stud to hang my elk.
noharleyyet
07-08-2009, 09:06 AM
I used a 3 1/2" lag bolt in a stud to hang my elk.
...good thing with your propensity for home/truck collision.;)
MNHunter
07-08-2009, 09:49 AM
That is a hard lesson learned. Elk=At least a 3 inch lag.
On your next house, do like the big dogs and sheet the whole trophy room with 3/4 plywood before it is drywalled.
I just did that in my newly created mancave. Feels good knowing I can hang whatever, wherever and it will hit solid wood
if its possible to think that far ahead, save the money on plywood and build headers where you want to hang things. get a 2x12 and a piece of 1/2 inch osb to put in between them. cut them to the size betwen the studs, should be 14 1/2 inches, and nail them into the sides of the studs. now you have a rock solid backer that will hold anything you want to hang. been using this method for cabinets for years.
cut out that piece of drywall, then square it up. cut a new piece to the same size. cut a 1x4 8 inches longer than the width, or top to bottom. screw these pieces in place. then screw the new drywall to the 1x4's. no taping necessary.
sorry to see that happen Fin.